[2-280532] Universal pin comfort short, blackening
Length (a): 100 mm
Weight: 0,6 kg
Diameter: 28 mm
Shear force: 200 kN
Tightening torque Steel: 25 Nm
Tightening torque Aluminum: 10 Nm
Tensile force: 25 kN
Product description
The universal pin is used to connect the individual elements of the kit. The pin allows the withdrawal of elements in the range from 45 mm to 53 mm, the long pin then in the range from 70 mm to 78 mm. Balls are used for clamping, which prevent deformation of the hole at high clamping force. The universal pin can be tightened with the appropriate handwheel or hex key (Article number: 280854). This pin is NOT suitable for connecting the table and the " U-shape "! The tightening torque depends on the type of table.
- suitable for clamping 2 parts
- surface treatment - blackening
- with hexagon socket (size 14)
*SIEGMUND PRODUCTS ARE INTENDED FOR THE CZECH AND SLOVAK MARKET
Specific References
16 other products in the same category:
[2-280571] Quick-release pin adjustable without groove short - surface finish...
[2-AP280530] Countersunk head pin without groove for clamping 4 parts,...
[2-280583] Connecting pin with shoulder for clamping 2 parts, blackening
[2-289009.10] O-ring 22 mm for clamping pins system 28, prisms and locating pins
[2-280741] Distanční kroužek pro magnetický čep ‐ povrchová úprava - černění
[2-280511] Quick-release pin without groove for clamping 2 parts, blackening
[2-AP280528] Countersunk head pin without groove for clamping 2 parts,...
[2-280533] Universal comfort pin long, blackening
- Reduced price