[2-280536] Universal pin Basic short, blackening

Length (a): 84 mm
Weight: 0,43 kg
Diameter: 28 mm
Shear force: 200 kN
Tightening torque Steel: 25 Nm
Tensile force: 25 kN

Product description

The universal pin Basic is the ideal element for connecting individual Siegmund components. Used to join parts of different thicknesses. The clamping range of the short pin is 42-57 mm, of the long pin 67-82 mm. Thanks to the o-ring, the universal Basic pin is ideally centered in the system holes. Balls are used for clamping, which prevent deformation of the hole even when a large clamping force is applied. The universal pin can be tightened with a handwheel or a hex key 14 (Article number: 280854). This pin is NOT suitable for connecting the table and the “U-shape” angle! It is recommended to clean the holes with a brush before using this simple pin. The tightening torque depends on the type of table.

- suitable for clamping 2 parts

- surface treatment - blackening

- with internal hexagon (size 14)

*SIEGMUND PRODUCTS ARE INTENDED FOR THE CZECH AND SLOVAK MARKET